06 Jun How To use air compressor PCP
In a few simple steps, we will show you in this video how to proceed with loading the tank on your pcp air rifle using the Stoeger AIRGUNS compressor.
WARNING! Safety first! Always make sure that the tank tube of your air rifle is completely empty. Also, make sure that there are no pellets inside the barrel and that the magazine has been removed from the gun.
Here are some simple instructions that we recommend you follow to properly and safely load with the compressor.
Correctly connect the compressor cables to the car battery, respecting the correct polarity.
Press the red switch selecting the type of power (DC 12V) needed for loading. In this case, the chosen power is 12V.
After selecting the power type, remove the black rubber cover and check that the compressor is properly connected before accessing the controls and settings.
Identify and select the correct voltage based on the available power source, 115 or 230 volts.
At this point, using the appropriate hose, connect the compressor to the air rifle and set the chosen pressure value on the pressure gauge.
After selecting the correct settings, press the red switch to start the compressor. (AC 110/220V)
Now you can start the loading process by simply pressing the Start button on the compressor.
WARNING! Once the loading is complete, make sure to properly turn off the compressor by setting the button to «0».
Complete the operation by releasing the pressure in the compressor through the bleed valve. At this point, carefully disconnect the hose from the air rifle and properly store the equipment.
FOLLOW THE HOW TO VIDEO