How To reassemble XM1 Ranger and XM1 Scout

16 Avr How To reassemble XM1 Ranger and XM1 Scout

Posted at 16:43h in How To by studiopieri

In a few simple steps, we will show you in this video how to assemble your XM1 Ranger and XM1 Scout rifle.
WARNING! Safety first! Always ensure that the tank tube of your rifle is completely empty. Also, make sure there are no pellets inside the barrel and that the magazine has been removed from the rifle.
We recommend always placing your rifle on a flat and stable surface and using a mat to protect both the rifle and the work surface.

Start assembling your rifle by inserting the valve. It is important to orient it correctly to ensure optimal and efficient operation. After placing the valve in the correct position, it is necessary to secure it using the pin.
WARNING! It is important to secure the valve so that it remains stable during use.

At this point, insert the striker mass and the spring into the system. Once the components are properly positioned, screw in the power adjustment screw.

Now it’s time to assemble the trigger group, which is essential for the proper functioning of the rifle. Ensure that all pins and screws are positioned and tightened correctly.

Proceed by inserting the spool and the spring into their housing. These components ensure the regulation of pressure inside the rifle. After positioning them, secure the manometer block to ensure that the pressure measurements are accurate and stable.

We conclude the assembly operation by inserting the tank tube and finally the mount. The latter is essential for stabilizing the rifle during shooting, so make sure it is securely anchored.