
30 Avr How To adjust the trigger in XM1 Ranger and XM1 Scout
In a few simple steps, we will show you in this video how to proceed with the correct adjustment of the trigger on your XM1 RANGER rifle.
ATTENTION! Safety first! Always make sure that the air tank of your rifle is completely empty. Also, ensure that there are no pellets inside the barrel and that the magazine has been removed from the gun.
We recommend always placing your rifle on a flat and stable surface and using a mat to protect the gun and the work surface.
After measuring the initial trigger pull weight, gently turn the rifle over and remove the stock by unscrewing the tightening screws.


Adjust the trigger pull weight using the front screw.

Then, adjust the trigger travel according to your needs using the rear screw.

Once the operation is complete, reassemble the stock onto the rifle and measure the new trigger pull weight.
Now you are perfectly capable of adjusting the trigger pull weight on your XM1 RANGER rifle.

FOLLOW THE HOW TO VIDEO