09 Avr How To disassemble XM1 Ranger and XM1 Scout

In a few simple steps, we will show you in this video how to disassemble your XM1 RANGER and XM1 SCOUT air rifle.
SAFETY FIRST! Before proceeding, make sure the air tank is completely empty, there are no pellets inside the barrel, and the magazine has been removed. Always work on a stable surface, using a mat to protect both the rifle and the work surface.

Begin disassembling your rifle by removing the stock. At this point, after completely emptying the air from the tank, carefully remove it.

Using a screwdriver, proceed to remove the trigger group, being careful not to damage any internal parts.

Continue disassembling by removing the power adjustment screw, and extracting the spring and hammer. Continue by removing the pressure regulator gauge block, its spring, and the pin.

Complete the disassembly procedure by removing the valve securing pin, and then extracting the power valve located towards the muzzle end of the barrel.

Now you are perfectly capable of correctly disassembling your XM1 RANGER and XM1 SCOUT rifle.

FOLLOW THE HOW TO VIDEO